Samruddhi Industries (Accuplus)
Samruddhi Industries (Accuplus)
Saijpur Bogha, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL

Circumference Gauge Pi Tape

Our product range includes a wide range of 300-900mm pi tape usa stainless steel, 28-300mm pi tape usa stainless steel, 300-600mm pi tape usa spring steel, 300-900mm pi tape usa spring steel, 600-900mm pi tape usa stainlees steel and 15-50mm pi tape usa stainless steel.

300-900mm Pi Tape USA Stainless Steel

300-900mm Pi Tape USA Stainless Steel
  • 300-900mm Pi Tape USA Stainless Steel
Get Best Quote
Approx. Price: Rs 33,050 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size300-900mm
Tape Length300-900mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .03mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents .5mm of diameter, while each line on the vernier represents .01mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension for O.D. tapes (For I.D. tapes, use 0 kg tension). Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero). In this example, the value is 660.0mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 23 (0.23mm). Finally, to obtain the diameter of the object, simply add the two values together: 660.0mm + 0.23mm = 660.23mm. When using a standard O.D. tape on an I.D. surface, add double the tape thickness to the reading to arrive at the I.D. of the part. It is suggested that direct I.D. tapes be used for inside diameter readings. As a suggestion for checking very large diameters – pieces of masking tape can be used to hold the tape in the proper parallel position.

care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

28-300mm Pi Tape USA Stainless Steel

28-300mm Pi Tape USA Stainless Steel
  • 28-300mm Pi Tape USA Stainless Steel
Get Best Quote
Approx. Price: Rs 19,050 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size28-300mm
Tape Length28-300mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

300-600mm Pi Tape USA Spring Steel

300-600mm Pi Tape USA Spring Steel
  • 300-600mm Pi Tape USA Spring Steel
Get Best Quote
Approx. Price: Rs 11,600 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size300-600mm
Tape Length300-600mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

300-900mm Pi Tape USA Spring Steel

300-900mm Pi Tape USA Spring Steel
  • 300-900mm Pi Tape USA Spring Steel
Get Best Quote
Approx. Price: Rs 21,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size300-900mm
Tape Length300-900mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents .25mm of diameter, while each line on the vernier represents .01mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero). In this example, the value is 27mm plus 3 lines or 27.75mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 15 (0.15mm). Finally, to obtain the diameter of the object, simply add the two values together: 27.75mm + .15mm = 27.90mm. Direct Inside Diameter tapes are not available in this style. These Pi Tape® gages are guaranteed to ± .03mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

600-900mm Pi Tape USA Stainlees Steel

600-900mm Pi Tape USA Stainlees Steel
  • 600-900mm Pi Tape USA Stainlees Steel
Get Best Quote
Approx. Price: Rs 21,280 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size600-900mm
Tape Length600-900mm
Tapes TypeStainlees Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents .5mm of diameter, while each line on the vernier represents .01mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension for O.D. tapes (For I.D. tapes, use 0 kg tension). Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero). In this example, the value is 660.0mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 23 (0.23mm). Finally, to obtain the diameter of the object, simply add the two values together: 660.0mm + 0.23mm = 660.23mm. When using a standard O.D. tape on an I.D. surface, add double the tape thickness to the reading to arrive at the I.D. of the part. It is suggested that direct I.D. tapes be used for inside diameter readings. As a suggestion for checking very large diameters – pieces of masking tape can be used to hold the tape in the proper parallel position.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

15-50mm Pi Tape USA Stainless Steel

15-50mm Pi Tape USA Stainless Steel
  • 15-50mm Pi Tape USA Stainless Steel
Get Best Quote
Approx. Price: Rs 19,050 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size15-50mm
Tape Length15-50mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents .5mm of diameter, while each line on the vernier represents .01mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension for O.D. tapes (For I.D. tapes, use 0 kg tension). Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero). In this example, the value is 660.0mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 23 (0.23mm). Finally, to obtain the diameter of the object, simply add the two values together: 660.0mm + 0.23mm = 660.23mm. When using a standard O.D. tape on an I.D. surface, add double the tape thickness to the reading to arrive at the I.D. of the part. It is suggested that direct I.D. tapes be used for inside diameter readings. As a suggestion for checking very large diameters – pieces of masking tape can be used to hold the tape in the proper parallel position.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

900-1200mm Pi Tape USA Stainless Steel

900-1200mm Pi Tape USA Stainless Steel
  • 900-1200mm Pi Tape USA Stainless Steel
Get Best Quote
Approx. Price: Rs 32,550 / PieceGet Latest Price

Product Details:

BrandPI TAPE USA
Size900-1200mm
Tape Length900-1200mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Request
Callback
Yes! I am interested
View PDF

900-1200mm Pi Tape USA Spring Steel

900-1200mm Pi Tape USA Spring Steel
  • 900-1200mm Pi Tape USA Spring Steel
Get Best Quote
Approx. Price: Rs 14,700 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size900-1200mm
Tape Length900-1200mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy
Request
Callback
Yes! I am interested
View PDF

15-50MM Outside Diameter Pi Tape

15-50MM Outside Diameter Pi Tape
  • 15-50MM Outside Diameter Pi Tape
Get Best Quote
Approx. Price: Rs 12,750 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ApplicationIndustrial
MaterialSteel
ColorBlue
BrandPI Tape USA
Outside Diameter15-50 mm
Thickness0.18 mm
Gage6.35 mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care

Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.

Request
Callback
Yes! I am interested
View PDF

600-900mm Circumference Pi Tape

600-900mm Circumference Pi Tape
  • 600-900mm Circumference Pi Tape
Get Best Quote
Approx. Price: Rs 12,880 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ApplicationIndustrial
Length Range600-900 mm
Standard Thickness0.010 Inch
Standard Tapes1/4" wide Vernier Gage,a 1/2" wide Main Body and a 1/4" wide Gage Member
BrandPI TAPE USA
Size600-900mm
Tape Length600-900mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial

With the aid of modern machinery and techniques, the offered 600-900mm Circumference Pi Tape is manufactured with perfection.

 

Features 

  • Compact design
  • High adhesive strength
Request
Callback
Yes! I am interested

300-600 Mm Outside Diameter Tape(Stainless Steel)

300-600 Mm Outside Diameter Tape(Stainless Steel)
  • 300-600 Mm Outside Diameter Tape(Stainless Steel)
Get Best Quote
Approx. Price: Rs 19,950 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Size300-600mm
ApplicationIndustrial, Laboratory
Tape Diameter300-600 mm
BrandPI TAPE USA
Tape Length300-600mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial

Product Specifications:

Additional Information: Accuracy +/- .001" up to 144". Accuracy +/- .03 mm up to 3600 mm. MADE IN USA.
Range: 300 A600
Range (mm): 300-600
Description: Provides quick, accurate and easy measurements of both round and out of round diameters. Standard English reading tapes read to .001" diameter. Standard Metric reading tapes read up to .01 mm diameter.
Type: Pi Tape
Request
Callback
Yes! I am interested
View PDF

28-300mm PI Tape USA Spring Steel

28-300mm PI Tape USA Spring Steel
  • 28-300mm PI Tape USA Spring Steel
Get Best Quote
Approx. Price: Rs 11,250 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Size28-300mm
ApplicationIndustrial
MaterialSpring Steel
Thickness0.18 mm
Body Width12.7mm
Gage6.35 mm

Features
  • Pi-tape diameter tapes are manufactured to exacting standards in temperature controlled facilities at 68 DegreeF (20 DegreeC). The lines and numerals on our standard tapes are engraved and acid etched on a ground surface. The tapes have fixed readings that do not require periodic adjustments.
  • Pie tape standard Imperial tapes (inches) read to 0.001" diameter with an accuracy of +-0.001" up to 144 inches.
  • Pie tape standard metric tapes (millimeters) read to 0.01mm diameter with an accuracy of +-0.03mm up to 3,600 millimeters.
  • Each Pi Tape brand precision measuring tape is delivered with a Calibration Report traceable to the National Institute of Standards and Technology and all calibrations are performed in accordance with ANSI/NCSL Z540-1-1994, ISO/IEC 17025, ISO 10012-1, MIL-STD 45662A and 10CFR, part 21.
Request
Callback
Yes! I am interested
View PDF
X

Explore more products



Reach Us
Parag Patel (Proprietor)
4/A, Shayona Center, Ground Floor
Saijpur Bogha, Ahmedabad- 380025, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS