Testex Press O Film Tape

Approx. Rs 8,800 / PieceGet Latest Price

Additional Information:

• Minimum Order Quantity: 1 Piece
• Delivery Time: Ex Stock

Approx. Rs 2,600 / PieceGet Latest Price

• Grade (descriptive) Range When Used With Gage
• (mils) / (um)
• Fine / Medium not applicable
• Coarse Minus 0.5 to 1.0 / 12 to 25
• Coarse 0.8 to 2.5 / 20 to 64
• X-Coarse 1.5 to 4.5 / 38 to 115
• X-Coarse Plus 4.6 to 5.8 / 116 to 147

Approx. Rs 2,400 / UnitGet Latest Price

Testex Press-O-Film Replica Tape

Press-O-Film (POF) consists of a layer of crushable plastic microfoam coated onto a polyester film of highly uniform thickness.

When compressed against a roughened material, Press-O-Film accurately replicates details of its surface roughness.

The impression can be studied in several ways:

Testex Tape is popularly called as Press-O-Film. Press-O-Film provides surface profile of a basted cleaned surface. It can produce virtually exact replicas of the blasted surface profile, which can be measured, using a snap gauge. Testex offers a simple and very accurate method of measuring blasted profiles. Press-O-Film consists of layer of crushable plastic micro foam coated onto a polyester film of highly uniform thickness. Using surface profile gauge or testex tape can test surface roughness. Most commonly used testex tape as it can give permanent record of the surfaces. Place the Testex Tape (Press-O-Film) firmly on the blasted surface, apply moderate pressure with the burnishing tool, the replica has now been taken and can be measured using the snap gauge. Testing & Inspection can be done in three easy steps. Detailed procedure is furnished with testex kit or tapes. Testex Tape is supplied in a roll containing 50 tests and is available in four different grades to cater for different applications. The snap gauge is supplied in a carrying case with a burnishing tool. Paint applicators, inspectors and researchers for its simple operations and results prefers to use Testex tapes (Press-O-Film) Testex Tape (Press-o-film) complies with ASTM, NACE and SSPC methods measurement. ASTM- Reproducibility is given in ASTM Standard 4417-93 for both "X-coarse" and "coarse" grade replica tape. NACE- Standard RP0287-95 addresses the issue of accuracy of measurement, test results. SSPC- The Society for Protective Coatings, recommends a minimum of three measurements of profile per 100 square feet (10 square meters). ISO- International Organization for Standards- Draft Standard ISO8503-5 describes preparation of steel substrates before application of paint and related products. Testex kit comprises two rolls Press-O-Film (X Coarse supplied as standard, specify different grade if required), snap gauge and burnishing tool.

Approx. Rs 2,400 / UnitGet Latest Price

Testex is the manufacturer of Press-O-Film replica tape. Press-O-Film provides inspectors and researchers a simple way to obtain an impression of a surface.

Press-O-Film (POF) consists of a layer of crushable plastic microfoam coated onto a polyester film of highly uniform thickness.

When compressed against a roughened material, Press-O-Film accurately replicates details of its surface roughness.

The impression can be studied in several ways:

1. A simple micrometric dial thickness gage can be applied to the replica for field measurement of the average maximum peak-to-valley roughness, or "profile," of a replicated surface, or,
2. A digital thickness gage such as the can also field-measure profile and bridge the gap between tape grades by incorporating automatic

• Brand Name:Testex
• Kit Contents: 50 piece roll
• Colour: White

Approx. Rs 2,350 / UnitGet Latest Price

Testex Press-O-Film Replica Tape

Press-O-Film (POF) consists of a layer of crushable plastic microfoam coated onto a polyester film of highly uniform thickness.

When compressed against a roughened material, Press-O-Film accurately replicates details of its surface roughness.

The impression can be studied in several ways:

Testex Tape is popularly called as Press-O-Film. Press-O-Film provides surface profile of a basted cleaned surface. It can produce virtually exact replicas of the blasted surface profile, which can be measured, using a snap gauge. Testex offers a simple and very accurate method of measuring blasted profiles. Press-O-Film consists of layer of crushable plastic micro foam coated onto a polyester film of highly uniform thickness. Using surface profile gauge or testex tape can test surface roughness. Most commonly used testex tape as it can give permanent record of the surfaces. Place the Testex Tape (Press-O-Film) firmly on the blasted surface, apply moderate pressure with the burnishing tool, the replica has now been taken and can be measured using the snap gauge. Testing & Inspection can be done in three easy steps. Detailed procedure is furnished with testex kit or tapes. Testex Tape is supplied in a roll containing 50 tests and is available in four different grades to cater for different applications. The snap gauge is supplied in a carrying case with a burnishing tool. Paint applicators, inspectors and researchers for its simple operations and results prefers to use Testex tapes (Press-O-Film) Testex Tape (Press-o-film) complies with ASTM, NACE and SSPC methods measurement. ASTM- Reproducibility is given in ASTM Standard 4417-93 for both "X-coarse" and "coarse" grade replica tape. NACE- Standard RP0287-95 addresses the issue of accuracy of measurement, test results. SSPC- The Society for Protective Coatings, recommends a minimum of three measurements of profile per 100 square feet (10 square meters). ISO- International Organization for Standards- Draft Standard ISO8503-5 describes preparation of steel substrates before application of paint and related products. Testex kit comprises two rolls Press-O-Film (X Coarse supplied as standard, specify different grade if required), snap gauge and burnishing tool.

Approx. Rs 2,350 / UnitGet Latest Price

Approx. Rs 2,400 / PieceGet Latest Price

Testex is the manufacturer of Press-O-Film replica tape. Press-O-Film provides inspectors and researchers a simple way to obtain an impression of a surface. Press-O-Film (POF) consists of a layer of crushable plastic microfoam coated onto a polyester film of highly uniform thickness. When compressed against a roughened material, Press-O-Film accurately replicates details of its surface roughness.

The impression can be studied in several ways:

• A simple micrometric dial thickness gage can be applied to the replica for field measurement of the average maximum peak-to-valley roughness, or "profile," of a replicated surface, or,
• A digital thickness gage such as the can also field-measure profile and bridge the gap between tape grades by incorporating automatic

• An optical profiling interferometer or confocal microscope can be used in laboratory settings to produce maps of the replica''s surface topography. This is most appropriate to study of subtle features at the microinch (25 nanometer) level.

Approx. Rs 2,200 / UnitGet Latest Price

Approx. Rs 2,200 / UnitGet Latest Price

• Grade (descriptive) Range When Used With Gage
• (mils) / (um)
• Fine / Medium not applicable
• Coarse Minus 0.5 to 1.0 / 12 to 25
• Coarse 0.8 to 2.5 / 20 to 64
• X-Coarse 1.5 to 4.5 / 38 to 115
• X-Coarse Plus 4.6 to 5.8 / 116 to 147