Samruddhi Industries (Accuplus)

MHT200 is a small, light and portable tester. It is most Suitable for testing of heavy, big or outdoor metal parts. It Can measure in any direction and also easy to be used and also easy to be used and accurate on curved test surfaces.

Technical Specification

Additional Information:

• Item Code: TH-170

Additional Information:

• Delivery Time: Ex stock
• Packaging Details: Abs Plastic Box

• Automatically switch off
• Back light for convenient use in darkness
• Software calibration
• Battery capacity display
• AAA 1.5V battery
• Computer software available.

Additional Information:

• Item Code: TIME-5100
• Delivery Time: Ex Stock
• Packaging Details: Aluminum Box

• Electronic block
• UCI probe
• Leeb probe
• 3 batteries AA
• Charger
• USB cable
• Operating manual
• Software for PC
• Case

Additional Information:

• Item Code: T-UD3
• Delivery Time: Ex Stock
• Packaging Details: Plastic Box

•  Compact plastic case suitable for use under poor working conditions. Test at any angle, even upside down.
•  Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
•  Large screen (segment LCD), showing all functions and parameters. With EL background light.
•  Large capacity memory could store 100 groups information.
•  Datapro Software to connect with PC via RS232 port. Micro printer support
•  Software calibration function.Die cavity of moulds
•  Bearings and other parts
•  Failure analysis of pressure vessel, steam generator and other equipment
•  Heavy work piece
•  The installed machinery and permanently assembled parts.
•  Testing surface of a small hollow space
•  Material identification in the warehouse of metallic materials
•  Rapid testing in large range and multi-measuring areas for large-scale work piece

Additional Information:

• Item Code: TH170A
• Delivery Time: Ex Stock

-Compact plastic case suitable for use under poor working conditions. Test at any angle, even upside down. -Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL -Large screen (segment LCD), showing all functions and parameters. With EL background light. -Large capacity memory could store 500 groups information. –Data pro Software to connect with PC via USB Micro printer support

Product Application: 

1. Die cavity of molds
2.Bearings and other parts
3.Failure analysis of pressure vessel, steam generator and other equipment
4.Heavy work piece
5.The installed machinery and permanently assembled parts
6.Testing surface of a small hollow space
7.Material identification in the warehouse of metallic materials
8.Rapid testing in large range and multi-measuring areas for large-scale work piece.

Our advantage

1. We have our own factory with competitive price

2. Quality is our culture

3. time is gold, we have professional team produce the product with short time.

4. With us your money in safe 

Main Features

1. Large screen (128×64 dot matrix LCD), showing all functions and parameters.
2. Test at any angle, even upside down.

3. Support "forged steel (Steel)" material, when using the D/DC impact device test "forged" sample, can read HB value directly, without the need for manual checking table.
4. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL and three types of strength values immediately.
5. Seven impact devices are available for special application. Automatically identify the type of impact devices. 
6.Large capacity memory could store 600 groups (Relative to average times32~1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc. 
7.Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit. 
8. Battery information indicates the rest capacity of the battery and the charge status.
9. User calibration function.
10. USB port with the PC humanity multi-functions data proceeding software. 
11. Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
12. NI-MH rechargeable battery as the power source. Charge circuit integrated inside

• It is a small, light and portable tester.
• It is most suitable for testing of heavy, big or outdoor mental parts.
• Conforms to the Standard ASTM A956-02

Additional Information:

• Item Code: MHT-170
• Delivery Time: At Stock

We are operating as the successful distributor and trader of Poldi Hardness Tester Bluesteel. The offered product is used for testing the hardness of ferrous and non ferrous metals. It is dimensionally accurate and has been sourced from a reliable vendor base for maintaining quality. Our product range is regarded for being flawless, is supplied within the stipulated time period and also is in tune with the international standards "Poldi" type impact hardness tester for metals (ferrous as well as nonferrous) with 10 mm Brinell ball indentor and with Magnifiscope, supplied with instruction manual in four languages Viz., English, German, Portuguese ,Russian.

Features:

• Long service life
• Intricately designed
• Reliable

• Wide measuring range. Based on the principal of Leeb hardness testing theory.
• It can measure the Leeb hardness of all metallic materials.
• Large screen 3 inch, showing all function and parameters.
• Test at any angle, even upside down.
• Direct display of hardness scales HRB,HRC,HV,HB,HS,HL.
• Seven impact devices are available for special application. Automatically identify the

Type of impact devices.

• Large capacity memory could store 500 groups (relative to averge
• times32~1)information including signal measured value, mean value,testing
• Date, impact direction, impact times ,material and hardness scale etc.
• Upper and lower limit can be preset. It will alarm automatically when the result value
• Exceeding the limit.
• Battery information indicates the rest capacity of the battery and the charge status.
• User calibration function.
• Software to connect with PC via USB port.
• With EL background light.
• Thermal printer integrated, convenient for in field printing.
• NI-MH rechargeable battery as the power source. Charge circuit integrated inside the
• Instrument. Continuous working period of nolees then 150 hours (EL off and no
• Printing).
• Auto power off to save energy.

• Die cavity of molds
• Bearing and other parts
• Failure analysis of pressure vessel, steam generator and other equipment
• Heavy work piece
• The installed machinery and permanently assembled parts
• Testing surface of a small hollow space
• Material identification in the warehouse of metallic material
• Rapid testing in large range and multi measuring areas for large- scale work piece

Working Conditions

• Relative humidity 90%;
• The surrounding environment should avoid of vibration, strong magnetic field,
• corrosive medium and heavy dust.

Technical Specification

• Display dot matrix LCD, 128x64 dots
• Data memory 500 groups max. (Relative to impact times 32~1)
• Printing paper width is (57.5+-0.5)mm, diameter is 30mm
• Battery pack 6V NI-MH
• Continuous working period about 150 hours (with backlight off, no printing)
• Communication interface USB1.1

Additional Information:

• Item Code: TH-270