Paint and Surface Finish Testing Instruments

Product Details:

High Voltage Holiday Detector is an instrument used to detect Porosity and holes in anti- corrosive coating (electrically insulated) on metallic pipes / surfaces. This test is carried before the pipes are laid underground.
The pipe is connected to earth (nominal) and an electrode charged to high tension is moved over the coating. At the place of a hole, discontinuities arking takes place and the instrument gives a Sound Signal alarm.
Salient Features

• Holiday Detector is a fully solid state device having no moving parts making it maintenance-free.
• Visual and Audible Signalling Alarms 
• Portable and Light Weight 
• Ergonomic Design 
• External Input Fuse for Accidental Protection. 
• Wide Range of Spring Electrodes, Brass brushes and Conductive brushes available.

 

 

Additional Information:

• Delivery Time: 1 Days
• Packaging Details: Caring Case

Product Details:

Digital Pull-Off Adhesion Tester BGD-500 is a portable, hand-operated instrument which is used tomeasure the force required to pull a specified test diameter of coating away from its substrate usinghydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strengthof adhesion to the substrate. Pull-Off Adhesion Tester is a easy to operate and fully portable,provides a test results values for adhesion.

High precision digital pull-off type measuring instruments for adhesion and bond strength testing ofall types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortarsand plasters and other materials. The self-adjusting feature results in extremely accurate andreproducible adhesion test results. The test is performed by securing a self-aligning quick coupling(dolly) perpendicular to the surface of the coating with an adhesive. After the adhesive is cured, atesting apparatus is attached to the loading fixture and aligned to apply tension perpendicular to thetest surface. BGD 500 conforms to international standards including ASTM D4541/D7234, ISO4624/16276-1, AS/NZS 1580.408.5 and others

Digital Pull-Off Adhesion Tester

• BGD 500 Digital Adhesion Tester
• BGD 1522 20mm Dolly(10 pcs/package)
• BGD 1526 Cutting Tool
• BGD 1527 3M Adhesive

OPTIONAL

• BGD 1520 10mm Dolly(10 pcs/package)
• BGD 1521 20mm Dolly(10 pcs/package)
• BGD 1523 50mm Dolly(5 pcs/package)

Product Details:

Bresle Patches will allow you to extract salts from blast-cleaned steel for measurement using the Horiba Conductivity Meter in the Bresle Patch Test.

Salts are almost colourless and are localized at the lowest point of the rust pits.  If they are not removed prior to painting, chemical reactions can result in blister formation and accumulations of rust that destroy the adhesion between the substrate and the applied protective coating.

Product Details:

Known in the industry as a reliable organization, we are engrossed in providing Cross Hatch Tester.

 

Features:

• Superior performance
• Low maintenance

Product Details:

Pull Off Adhesion Tester is a easy to operate and fully portable, provides a test results values for adhesion. Applications include: paint or plasma spray on bridge decking, coatings on steel, aluminum or concrete, etc supplied with carrying case for site jobs. Totally hand operated mechanical instrument. Hand Cutter for EN13144 and ISO 4624 tests. Adhesion Tester can be used in accordance with AS 1580.408.5, ASTM D 4541, EN 13144, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-062, NF T30-606. Adhesion Tester is very simple and uses a test dolly. Dolly is bonded to the coating using an adhesive. The tester consists of a spring arrangement which applies a lift force to the dolly. When the dolly is pulled off the surface, an indicator on the scale shows the numerical value of adhesion expressed in terms of the force required to remove the dolly. Adhesion Tester Model 1064 has test range of 0 - 3200 PSI (0 - 22 N/mm²). Calibration certificate is provided for every instrument with valid traceability. Instrument Dimensions Height: 150mm Diameter: 75mm Dolly Size Diameter: 20mm (0.76") Area: 314mm² (0.5sq inch)
 

Product Details:

Owing to our vast industry experience, we have been able to offer Pin Hole Detector. These detectors are checked on various parameters to ensure flawlessness.

 

Features:

• Longer service life
• High performance

Additional Information:

• Item Code: SD120

Product Details:

Digital Pull-Off Adhesion Tester BGD-500 is a portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. Pull-Off Adhesion Tester is a easy to operate and fully portable, provides a test results values for adhesion.High precision digital pull-off type measuring instruments for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. The self-adjusting feature results in extremely accurate and reproducible adhesion test results. The test is performed by securing a self-aligning quick coupling (dolly) perpendicular to the surface of the coating with an adhesive. After the adhesive is cured, a testing apparatus is attached to the loading fixture and aligned to apply tension perpendicular to the test surface. BGD 500 conforms to international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and othersMain Technical Parameters Dolly Size  20mm Standard 10mm 14mm 50mm Optional  Resolution  0.01MPa 1psi Accuracy ±1% Full scale  Max. Pull-off Pressure Φ10mm dolly →0-80 MPa Φ14mm dolly→0-40 MPa Φ20mm dolly→0-20 MPa Φ50mm dolly→0-3.5 MPa Power: Built-in rechargeable lithium battery, and standard configuration charging adapter.  Adhesion Tester Size 360mm×75mm×115mm???L x W x H

Additional Information:

• Delivery Time: Ex Stock
• Packaging Details: Plastic Suitcase

Product Details:

Push pull Meter is a force measuring instrument for both Push and Pull. There is ZERO ADJUST. An additional red pointer retains the maximum reading encountered.

Technical Specification:


Law of weights measures not applicable. Weights Dimensions are nominal.
Push pull Meter is a force measuring instrument for both push and pull.
RED POINTER retains the maximum reading encountered. By rotating it anti-clockwise set it to zero again.
Because of gravity the METER when held inclined (or upside down) shows reading different then when held vertically. To nullify gravity effect, turn ZERO ADJUST holding the METER the same way as will be held while measuring.
Spot calibration gives better results. Apply standard force ( the one nearest to the force to be measured), and with the ZERO ADJUST make the instrument read the value of the standard force.
METERS may require a light tap to overcome static friction.
To prevent damages to inside parts, hold the pushing/pulling ROD firmly while changing accessories at its ends.

Additional Information:

• Item Code: Yuyustsu1

Product Details:

Cross hatch cutter is designed and manufactured in accordance with ISO 2409-1974.It is also complies withGB/T9286-98 standard.The instrument is mainly used for the measurement of the grid scratching adhesion of the organic paints. It is notonly applicable to the laboratories, but also good to the construction sites under various conditions.There are three specifications of multi-blade cutters (1mm, 2mm, and 3mm), which can be closed for differenttest conditions.The multi-blade cutter with 1mm distance is suitable to the test pieces with the paint film less than 60um.The multi-blade cutter with 2mm distance is suitable to the test pieces with the paint film of 60-100umIntroduction:2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 andASTM D3359 standards.

Additional Information:

• Delivery Time: Ex stock

Product Details:

The Bresle Test Kit supplies all the necessary equipment to test for chloride and soluble salt surface contaminants on blasted surfaces in compliance with ISO 8502-6 & ISO 8502-9.The test is highly important in view of Non visible salts present on the surfaces can lead to premature failures. Many coatings fail due to salts such as chlorides and sulphates contaminating the surface prior to the coating applicationThis contamination can be tested quickly and simply using the Bresle Test Kit. This kit has advantage over portable units. Test can be quickly performed at site, shop floor and plants.

The Bresle Patch is attached to the surface; the distilled water is injected with a syringe then extracted, repeat ten cycles of injecting and extracting then measure with the Conductivity Meter. Compact conductivity meter will measure the quantity of salts in μg/cm2 (ppm) and mg/m2. Bresle test complies with ISO 8502-6, which relates to the extraction of soluble contaminants and ISO 8502-9, which relates to the conduct metric determination of soluble salts. Calibration Certificates traceable are available for the Conductivity Meter in the kit.

The Bresle Test Kit is supplied with 50 Bresle Patches, 1 Conductivity Meter, Calibration Solutions, 5x5ml Syringes, 25ml Beaker and 250ml Distilled Water. Additional Bresle Patches can be purchased to carry out further tests using this kit.

Part Numbers: BTK-001 Bresle Test Kit BTK-002 Bresle Patches (Pack of 50 Nos.) BTK-003 Bottle 250ml - Distilled Water.

Additional Information:

• Item Code: EC22
• Delivery Time: Ex Stock

Product Details:

High-End Brand of Domestic Colorimeter
NH310 is a mainstream brand colorimeter introduced by 3nh which has synthesized the advantages of ten more traditional imported colorimetersand has experienced ten thousands tests and applied many innovative technologies. Accurate, Stable, Exquisite and Affordable!
The Preferred Solution for Color Quality Control Management

NH310 high-quality portable colorimeter has adopted multi-channel color sensors of international brands, more stable IC platform as well as efficient and accurate algorithms to provide users with accurate and fast color management and application. NH310 is also designed with ergonomics and humanized operation and it has applied for a number of patents. NH310 is a multifunctional colorimeter with high quality and competitive price. 3nh insists on independent research whose technology innovation is unique in color management field. NH310 is the most convenient colorimeter for users.

Product Details:

Conical Mandrel
The Tester is a mechanical tester used to determine the effects of bending
on the elasticity, adhesion and elongation properties of cured coatings on
sheet metal.
The frame has a bending lever with a roller 200 mm length which pivots
on a steel conical mandrel with a diameter from 4 – 38 mm.
A graduation indicates the mandrel diameter in both mm and inches.
The specimen can be bent on part of, or along, the entire length of the
mandrel, and the results (cracks) corresponding to different test diameters
can be observed in a single operation. This is ideal for use in conjunction
with the cylindrical mandrel, as it identifies the stop point for more
focused testing.
As the instrument is machined out of a solid block of steel, the particularly
robust and rigid construction provides excellent resistance to wear and
provides long service life. A large, sturdy powder coated base.

Product Details:

We are providing Viscosity Cup to our clients.

Product Details: